Berkeley Nucleonics ICX-FieldHawk real-time spectrum analyzer

ICX-FieldHawkSee all the signals, all the time.

Real-time spectrum analysis from 9 kHz to 40 GHz. Handheld, IP68, or pocket USB. One platform, one software, the full band in view.

9 kHz–40 GHz
Frequency
100 MHz
Real-time bandwidth
−159.9 dBm/Hz
1 GHz DANL
3.3 lb
Handheld

Three form factors.
One ICX platform.

Every ICX-FieldHawk runs the same SpectraCore firmware and the same measurement suite. Pick the form factor your mission needs.

BNC ICX-400 ICX-FieldHawk handheld spectrum analyzer

ICX-FieldHawk

Handheld real-time analyzer

All-in-one 10.1-inch multi-touch handheld. 3.3 lb, up to 40 GHz, 100 MHz real-time bandwidth. Built to walk the site and read the air in real time.

Models ICX-400
View handheld →
BNC ICX-400R ICX-FieldHawk-R field-ready spectrum analyzer

ICX-FieldHawk‑R

IP68 AI platform

Sealed IP68 tablet with an onboard Nvidia Jetson Orin NX processor. AI-accelerated spectrum work in the harshest field conditions, up to 40 GHz.

Models ICX-090R · ICX-400R
View field-ready →
BNC ICX-400U ICX-Series USB spectrum analyzer

ICX-Series

USB receiver

Pocket-size USB real-time receiver. Drone-deployable, open API, sweep speeds to 1.0 THz/s. Pairs with Windows, Linux, and embedded hosts.

Models ICX-090U · ICX-400U
View USB →
Key Specifications

Lab-grade performance, fielded.

9 kHz–40 GHz

Frequency Range

Two published tiers: 9 kHz to 9.5 GHz and 9 kHz to 40 GHz.

> 90 dB

IF & Image Rejection

Typical to 33 GHz, for clean measurements in dense RF environments.

−159.9 dBm/Hz

1 GHz DANL

At 1 GHz in a 1 kHz resolution bandwidth (−167.5 dBm/Hz on the 9.5 GHz tier).

−107.5 dBc/Hz

1 GHz Phase Noise

At 10 kHz offset.

100 MHz

Analysis Bandwidth

Gap-free real-time capture of transient and agile signals.

2.5 h

Battery Time

Typical, enough for a full field session.

Std.

Built-In Measurements

Channel Power, ACPR, OBW, Phase Noise, and more, standard.

IP68

Field-Ready

Sealed against rain, snow, dust, and submersion. The same lab-grade real-time performance, anywhere.

SoapySDR

Compliant

Appears in GNU Radio and other SoapySDR applications as a standard device, with the instrument calibration applied to the samples. Read the 42-page handbook.

Built for the field
Applications

Where ICX-FieldHawk goes to work.

Each application ships with a technical brief covering setup, method, and measurement.

Accessories

Antennas built for the band.

Berkeley Nucleonics ANT-100G directional antenna

Directional Antennas

Wideband directional antennas with a switchable pre-amplifier, sized for the ICX-FieldHawk band. ANT-100G covers 500 MHz to 10 GHz; ANT-200G covers 500 MHz to 20 GHz. The directional pattern is what makes triangulation and source-finding practical in the field.

See the whole spectrum, every time, for all time.

Talk to a Berkeley Nucleonics RF engineer about the ICX-FieldHawk configuration for your mission.

Contact Us
BIOZ

Cited in peer-reviewed research

Independent publications citing this instrument, indexed by Bioz. Citation counts and Bioz Stars ratings are shown live and update as new papers are indexed.

Open on Bioz →
Loading peer-reviewed citations…