Model 765 | Are the rise and fall time the same?
Yes. The Rise and Fall time for the Model 765 is 70ps. The amplitude is +/- 5V and there are 2 and 4 channel versions available.
Model 745T-20C | What if I need more than 20 channels of timing in my system?
The Model 745T-20C offers 20 channels per enclosure and can be daisy chained with additional units to a single trigger. However, for complex multi-channel applications, contact the factory. We can offer a custom card-level solution which may be more cost effective.
Model 577 | Can I order special outputs on just some of my channels?
Yes. The Model 577 is customizable using the ‘Ordering Chart’. Select how many channels you would like for options such as high power outputs, optical isolation, impedance matching, etc. Channels are paired.
Model 525 | What are the LEDs above the channel indicators (front) or under the indicators (back) for?
Channel indicator illumination indicates the channel is enabled a/o pulsing. Front panel indicators are convenient if your control GUI is in a different location or you are running multiple software applications.
Can Model 525 be used without a PC?
Yes, Model 525 can be powered by standard USB phone chargers and can run without the aid of a PC. A PC is only needed to set or change the pulse characteristics.
What is the difference between SiPM and PMT readout methods?
SiPMs are an alternative readout method to standard PMTs. With respect to signal processing and spectroscopic behavior, SiPMs behave differently compared to standard PMTs. The elements are typically 3×3 or 6×6 mm and can be combined into matrices. For applications where a small crystal size and low voltage operations are required SiPM readout can be…
