The Model 865 is a new product for 2018. The 1 GHz phase noise is extremely low in the standard unit (-87 dBc/Hz @ 10 Hz offset ). For even more demanding applications, we can install a special Low Noise option as in previous models. We believe the performance of the 865 with LN option…
The Model 855B is BNC’s flagship multi-channel RF/microwave signal generator, offering up to 4 phase-coherent channels in a 1U rack enclosure from 300 kHz to 42 GHz. Its standout features include industry-leading phase noise, independent per-channel control, and a compact form factor. [Full product overview →] – https://www.berkeleynucleonics.com/july-5th-2022-model-855b-product-high…
The key difference between LN and LN+ is that LN+ will have better long-term performance—for example, a better Allan variance for a longer time. For short-time performance, they are identical. Here’s another example…Option LN adds a 100 MHz OCXO on the ref board, applying to all channels. Option LN+ will do the same. The only difference is…
The Multi-Channel Model 855 allows for up to 4 channels in each 1U 19″ rack Mount enclosure. This design can be stacked as needed. We believe this is the most compact multi-channel offering with high performance on the market.
To check price and delivery, to place a Purchase Order, or to expedite an existing order, please call 415-453-9955, email info@berkeleynucleonics.com or fill out a Get a Quote form. Typical response time is less than 2 hours.
The Model 845 is a small footprint benchtop Microwave Signal Generator with very high performance. The space saving packaging eliminates most of the front panel controls in favor of a software GUI that can be developed and enhanced over time. The low power requirements are equally resourceful, even allowing for a battery option.
Any user data would be downloaded from a host computer and stored in the arb memory. Any kind of zero-intersymbol-interference or spectral shaping filtering would be done mathematically on the PC before the download.
This rear panel connector can be used to insert modulation signals onto a carrier. In conjunction with modes such as AM, FM, SSB, Ext Mod can even provide communication signals at the SIG OUT connector.
https://www.berkeleynucleonics.com/february-15th-2022-pitfalls-using-pulse-generator-drive-laser-diode
Yes. The Model 765 allows you to set the pulse top and pulse baseline from -2.5V to +2.5V.
