PVX-4150 | 1.5KV Bipolar Pulse Generator [Obsolete]

You are here:

PVX-4150 | ±1.5kV Pulse Output [Obsolete]

If you are interested in the PVX-4150, please look into the new PVX-4151.

The PVX-4150 pulse generator produces fast, high voltage waveforms to 1,500V. Optimized for high impedance capacitive loads, this module is well suited for driving extraction grids and deflection plates for electrostatic modulation of particle beams in time-of-flight mass spectrometers and accelerators.

The PVX-4150 pulse generator has rise and fall times less than 25 ns, with very flat voltage pulses to into a capacitive load. Pulse width can be set from 60 ns up to DC. It is a direct coupled, solid state half-bridge (totem pole) design, offering equally fast pulse rise and fall times, low power dissipation, and virtually no over-shoot, undershoot, or ringing. Incorporated into the PVX-4150 is all control and protection logic, support power, energy storage, and output network circuitry.

Overview

Features
  • 0 to ±1,500 V Pulse Output
  • <25 ns Rise and Fall Times, 240 kHz Pulse Repetition Frequency
  • Protected Against Arcs, Shorts and Load Transients
  • Voltage and Current Monitor Outputs

Specifications

Max Voltage Amplitude

1,500V

Max/Min Frequency

240 kHz

Rise/Fall Time

25ns

Pulse Engine (Trigger)

External

Pulse Polarity

Bipolar (+/-)

Remote Control

N/A

Form Factor

Benchtop, Rackmount Optional

Dimensions (in)

22 x 22 x 12

Weight (lbs)

19

Shipping Dimensions

24 x 19 x 13″

Shipping Weight

22 lbs

Technical Resources

Downloadable Resources

Downloadable resources such as datasheets, firmware, software, drivers and products manuals. Alternatively, you can browse resources directly by visiting our downloads page.

Media

Playlist

Price Lists

Price lists are available to our registered users. To view pricing for this and other products, please log in or create a free account.