:::..BNC | Products | Model 106/155 - 1064 nm Optical Module Specifications
banner
 

BNC Model 106C
1064 nm Optical Module
Class I

Used in Conjuction with BNC Model 6040 OpticalPulse Generator Mainframe

Fast Pulses, Impulses and CW

Models 090 and 106C provide operating capabilitiesunavailable from other 904 and 1064 nanometer optical sources. Among them,repetition rates to 100 MHz/ which greatly exceeds that available up to now.

Combined with the BNC Model 6040 Mainframe,these modules generate fast pulses, subnanosecond impulses and CW lightwhile maintaining the excellent timing accuracy, low jitter and nanosecondresolution of the mainframe. In addition, the 090 and 106C have two inputsfor stimulus from external signal sources: External Drive and External Modulation.

With External Drive the optical output is fast edge speed flat top pulsescorresponding to the input signal's timing. In External Modulation an electricalsignal is converted into analog optical form. Thus, it is now possible totransform signals from instruments such as a function or arbitrary waveformgenerator into their optical equivalents at 904 and 1064 nm as well as theother wavelengths described in the Model 6040 product bulletin.

Light Out

  • Spectral Peak
    1064 nm.
  • Spectral Width
    0.1 nm.
  • Power Levels
    1 mW, adjustable peak and baseline levels.
  • Resolution
    100 uW.
  • Transition Times (10% to 90%)
    1 ns rise time, 2 ns fall time.
  • Dynamic Range
    13 dB.
  • Absolute Accuracy
    +/- 1 dB (2 mW to 20 mW).
  • Fiber
    Contact Factory
  • Connector
    ST

Timing

  • Trigger
    Internal 0.01 Hz to 100 MHz; external 0 to 1 00 MHz.
  • Pulse Width
    Internal 3 ns to 640 s.
  • Impulse
    700 ps typical (fixed).
  • Delay
    0 to 640 s (plus fixed delay)
  • External Drive
    0 to 100 MHz; 300 mV min. amplitude; 50 ohms input.
  • External Modulation
    100 Hz to 200 MHz ( 3 dB); 100 mV rms/mW sensitivity (typical); 50 ohm input.
  • Module Delay
    10 ns typical (fixed) mainframe's Pulse Out to module's Light Out. Jitter100 ps rms.

Common Module Specifications

  • Store
    A ROM determines the instrument's allowable operating conditions andunits of display applicable for the installed module.
    A nonvolatile memory (RAM) in each module stores up to ten complete settings of operating conditions (trigger level, slope, etc.) and output pulse parameters.
  • Recall
    The RAM-stored settings can be manually or bus transferred to the mainframeto produce the pre determined outputs.
  • Weight
    2 Ibs net (0.9 kg); 5 Ibs shipping (2.3 kg).
  • Ambient
    Same as Model 6040 mainframe



Berkeley Nucleonics Corporation 2955 Kerner Blvd San Rafael, CA 94901 U.S.A
Phone: 800.234.7858 Fax: 415.453.9956 E-mail: info@berkeleynucleonics.com