:::..BNC | Products | Model PB-5 Precision Pulse Generator

Rep Rate:	2.0 Hz to 500 kHz
Width:	100 ns to 1 ms
Delay:	250 ns to 10 ms
Rise Time:	50 ns to 10 us (10 % - 90 %) in 8 steps
Decay Time:	0.5 us to 1.0 ms (100 % - 37 %) in 11 steps
Amplitude	0.0 to 10.0 V (0 to 5 V into 50 ohms) Scaleable in energy units. (kev)
Resolution:	155 uV
Jitter:	± 10 ppm
Attenuation:	0, 2, 5, 10, 20, 50, 100, 200, 500, 1000
Integral non-linearity:	± 15 ppm
Temperature stability:	± 5 ppm per ºC from 20ºC to 45ºC
Pulse Type:	Flat-top or Tail pulse - In tail mode, rise time is a fixed 50 ns, decay time is adjustable. In flat-top mode, both rise time and decay time are adjustable.
Polarity:	Positive/Negative
Ext. Trigger:	0 to 500 kHz, +100 mV to +3.5 v, threshold adjustable.
Width:	100 ns to 1 ms
Modes:	Single pulse via a front panel pushbutton; Internal Rep Rate; External Trigger; External Gate with the same pulse requirements as Ext Trig; Internal Ramp-adjustable start and stop points; adjustable ramp period 30-900 s, selectable number of ramp cycles, ramp in keV or volts. Clamped baseline option to bring the baseline to zero prior to the next pulse.
Stored Settings:	Up to 9 complete configurations with recall. Also stores parameters in use at shutdown for automatic recall when powered on.
Remote:	RS232 at 9600 baud, User Customized or LabView Drivers.
Power Required:	+24V , 170 ma -24V , 150 ma +12V , 450 ma -12V , 5 ma Portable power supply available for applications that require portability or benchtop use. See BNC Model AP-3 Portable NIM Power Supply.
Mechanical:	Triple-width AEC NIM module 4.05" wide x 8.70" high in accordance with TID-20893 ( Rev 3. ).
Weight:	2 lbs. 13 oz. net, 6 lbs shipping.

Block Diagram | PB-5 WinControl | PB-5 Introduction (.ppt)

The PB-5 sets a new standard for precision pulse generators. It offers full digital controllability with a built-in ramp generator for linearity testing. It provides tail and flat top pulses with outstanding integral linearity and extremely low amplitude change with temperature. The PB-5 is capable of testing the stability, linearity and resolution of the most demanding spectroscopy circuits and instrumentation. It is the successor to the industry standard, PB-4 pulse generator.

Features

• Fine Value

• Multiple functions

• Higher rates

• Fast automated testing

• Completely Programmable

• Built-in ramp generator

• Excellent linearity, stability and resolution

Applications

• Multi-Channel Analyzer Testing

• Nuclear Circuit Testing

• Pulse Height Analyzer Calibration

• Pile-Up and Saturation Tests

• Risetime and Bandwith Characterization

• NIM Module System Integration

• Radiation Detector Testing

• Temperature Stability +/-5ppm (world's best)

• Pulse Types: Flat Top, Tail Pulse

• Remote: RS-232, Labview Support

• Rise Time: Adjustable

• Fall Time (Decay): Adjustable

• Amplitude Resolution: 155uV steps

The 4x16 LCD display, keypad, and a spinner knob provide a user interface that is easy to use. RS232 interface is also standard along with memory that will store and recall nine complete pulse setups.

The Model PB-5 pulse generator provides unprecedented performance in a precision pulse generator. It includes a full-featured, highly flexible ramp generator and programmability. As a precision pulse generator, the PB-5 surpasses or equals all existing designs in the important performance areas of resolution, linearity and stability. The pulse repetition rates, which are variable over a broad range, go up to 0.5 MHz. The higher rates are required when testing for MCA and PHA linearity because of the high number of data points required for a statistically valid test.

The built-in ramp generator allows you to control ramp duration, the number of ramps and the ramp limits. Now you can test the entire range of your system or just a portion of that range. This ramp generator and precision pulse generator combination allows you to tackle the most demanding applications. The new user interface is intuitive and easy-to-use. Parameters can be selected and changed by spinner knob and/or keypad pushbuttons.

Berkeley Nucleonics Corporation

2955 Kerner Blvd., San Rafael CA 94901 U.S.A

Phone: 800.234.7858 Fax: 415.453.9956

E-mail: info@berkeleynucleonics.com