Light Pulse Generators

Model 310H

The Model 310H is a 800V electrical plug in for the BNC Model 6040 Electro/Optic Pulse Generator Mainframe

No Results

Model 202H

Fast High Voltage Pulses with Delay and Width Control

The Model 202H is a high-voltage (300V) plug-in module for BNC Model 6040 Mainframe. It offers nanosecond risetimes and very low jitter. The sharp edges of the 202H are ideal for testing components, gating flashlamps, triggering capacitor banks, or other experiments requiring high voltage pulses. The voltage is terminated into 50 Ohms. The pulse amplitude and width are adjustable via the front panel or remote programming.

No Results

Model 201E

Fast Pulses with Delay and Width Control

The Model 201E is a plug-in module for BNC Model 6040 Mainframe. It offers 150pS risetimes and very low jitter. The sharp edges of the 201E are ideal for testing components or triggering experiments. The pulse amplitude and width are adjustable via the front panel or remote programming.

The 201E may be triggered with an internal rate generator, external trigger or external modulation. There is an ECL output, a Pulse Out from the 6040, and a Fast Pulse Out from the 201E module (SMA connector).

No Results

Model 130

Models 090 and 106C provide operating capabilities unavailable from other 904 and 1064 nanometer optical sources. Among them, repetition rates to 100 MHz and precision control of amplitude and time domain.

Combined with the BNC Model 6040 Mainframe,these modules generate fast pulses, subnanosecond impulses and CW light while maintaining the excellent timing accuracy, low jitter and nanosecond resolution of the mainframe. In addition, the 090 and 106C have two inputs for stimulus from external signal sources: External Drive and External Modulation.

No Results

Model 106H

Used in Conjunction with BNC Model 6040 Optical Pulse Generator Mainframe, the Model 155H is similar to the Model 106H except for the following: The pulse wavelength is now 1550nm.

No Results

Model 155H

Used in Conjunction with BNC Model 6040 Optical Pulse Generator Mainframe, the Model 155H is similar to the Model 106H except for the following: The pulse wavelength is now 1550nm.

No Results

Model 106C

Models 090 and 106C provide operating capabilities unavailable from other 904 and 1064 nanometer optical sources. Among them, repetition rates to 100 MHz and precision control of amplitude and time domain.

Combined with the BNC Model 6040 Mainframe,these modules generate fast pulses, subnanosecond impulses and CW light while maintaining the excellent timing accuracy, low jitter and nanosecond resolution of the mainframe. In addition, the 090 and 106C have two inputs for stimulus from external signal sources: External Drive and External Modulation.

No Results

Model 155C

Models 090 and 106C provide operating capabilities unavailable from other 904 and 1064 nanometer optical sources. Among them, repetition rates to 100 MHz and precision control of amplitude and time domain.

Combined with the BNC Model 6040 Mainframe,these modules generate fast pulses, subnanosecond impulses and CW light while maintaining the excellent timing accuracy, low jitter and nanosecond resolution of the mainframe. In addition, the 090 and 106C have two inputs for stimulus from external signal sources: External Drive and External Modulation.

No Results

Model 090

The Model 090 Optical Module is used with the BNC Model 6040 Optical Pulse Generator Mainframe, much like Model 065 or Model 085. The primary difference with this module is that the spectral peak is 650nm.

No Results

Model 085

Used in conjunction with BNC Model 6040 Optical Pulse Generator Mainframe The Model 065 is similar to the Model 085 except for the following: The spectral peak is 650nm.

The Model 040 is similar to the 085 except for the center wavelength is 405nm and peak power is 5mW.

PRESS RELEASE

No Results